Sign up! UsernameUsername  PasswordPassword  Do login

Note: "The components depicted in this picture are for information purposes and in some instances they may not be the actual component of the product being purchased"

Roman Shades

1. Getting Started:

Carefully unpack your shades and check to make sure you have the following installation parts. We recommend reading through these instructions before starting the installation.

 

2. Parts Included:

1. Screws

2. Mounting brackets (only needed for outside mount)

3. Cord cleat (standard control)

4. Tension device (continuous control)

According to the Window Covering Manufacturers Association Inc., all labels must not be removed from the product. T o comply with child safety standards, all tension devices must be installed per the installation instructions provided in step 2B.

 

3. Tools you will need:

1. Drill with a 1/8" bit and a hex head and / or Phillips bit

2. Screwdriver

3. Metal tape measure

 

4. Types of mount:

install roller shades 1

 

5. Installation Hardware:

install roller shades 2

 

6. Mounting your Shades:

Inside Mount: The shades are to be attached to the window frame with the mounting brackets included. The brackets need to be placed so they will not interfere with the shade’s operating mechanism. Attach the brackets to the top of the window frame. Attach the brackets using the long screws provided, making sure the brackets are level with each other. Set the headrail on the brackets. Make sure the draw cords move freely around the mounting brackets. Attach the shade to the brackets using the short screws provided.

Outside Mount: The shades are to be attached to the window frame or wall with the mounting brackets included. The brackets need to be placed so they will not interfere with the shade’s operating mechanism. Attach the brackets to the wall or window frame at the desired height. Attach the brackets using the long screws provided, making sure the brackets are level with each other. Set the headrail on the brackets. Make sure the draw cords move freely around the mounting brackets. Center the shade back against the wall or window frame. Mark hole and pre-drill using 1/8" drill bit at each bracket location. Attach the shade to the brackets using the short screws provided.

Bracket mounting: The brackets should be installed approximately 2” from either side of the roman shade valance.

Inside Mount: The brackets are mounted flat against the top sill surface. Mounting a flush headrail requires a flat surface with a minimum depth of 1 7/8” Fully recessing the shade with the valance requires a flat surface with a minimum depth of 3” Shallow mounting requires ¾” minimum

Outside Mount: The brackets are mounted with two screws through the back end of the bracket flat against the window molding or the wall above the window. The bracket requires a minimum ½” high surface

install roller shades 4

7. Outside Mount Detail:

install roller shades 5

8. Inside Mount Detail

install roller shades 6